Models Pfb-M - KERN PFB 120-3 Mode D'emploi

7.3.2 Models PFB-M

Balance display
(example)
30
Operation
 Start balance by pressing
The balance will carry out a self-test.
Wait for „0.0" display.
 Press
.
Appears the reference quantity „10"
By pressing the
reference quantities 10, 20, 50, 100, 200 can be set.
 Place as many parts to count on the weighing plate
as the set reference quantity requires.
 Confirm by pressing
The balance is now in parts counting mode and counts
all units on the weighing plate.
 Press
.
The balance is in weighing mode and displays the
weight of the counted parts.
 Remove the counted parts
 Press
, the balance goes to weighing mode
ON
OFF
key several times, the
PFB-BA-e-1630