Publicité
Install the control box cover and turn the
●
circuit breaker to ON, then close the two plastic
covers on both sides of the panel.
Re-install the air grille by pushing the latch to
●
lock it and xing the two screws, then close the
two screw covers.
Step3: Optional parts installation
Wireless module
Wireless module, or named smart kit, if you
choose this con guration, please follow the
steps below to install.
NOTE:
If you choose this con guration, it is
recommended that installing this wireless
module during the step of panel installation.
Remove the protective cap of the wireless
●
module (smart kit).
©2024 Innovair Solutions. All Rights Reserved.
Open the cover with display panel, loosen the
●
screw and remove the cover.
Loosen the screw and remove the cover
35
www.innovair.com
Publicité
