Publicité
Connecting the other side of the connecting
cable to the wired controller.
Wired
controller
Purchase separately
CN41 2-core wire
(purchase separately)
WARNING
Please follow local regulations and take mea-
sures to isolate high voltage and low voltage.
NOTE:
Be sure to reserve a length of the connecting
wire for periodic maintenance. If there is a
connection lug at the end of shielded wire,
the connection lug should be properly
grounded.
©2024 Innovair Solutions. All Rights Reserved.
For ground
wire
Pass a tie through
the hole to x wire
17
www.innovair.com
Publicité
