10. Specifications
Weight
Dimensions
Cuff circumference
applicable to the
monitor
Memory
Contents
Protection against
electric shock
Applied part
Note
•These specifications are subject to change without notice.
•This monitor complies with the requirements of ISO 81060-2:2013.
In the clinical validation study, K5 was used on 85 subjects for
determination of diastolic blood pressure.
•This monitor has not been validated for use on pregnant patients.
•IP classification is degrees of protection provided by enclosures in
accordance with IEC 60529.
- This monitor and AC adapter are protected against solid foreign
objects of 0.5 inch (12.5 mm) diameter and greater such as a
finger.
- The AC adapter (IP 21) is protected against vertically falling water
drops which may cause issues during a normal operation.
- The AC adapter (IP 22) is protected against oblique falling water
drops which may cause issues during a normal operation.
•Operation mode classification complies with IEC-60601.
48
Monitor: Approximately 16.6 oz. (470 g) not
including batteries
Arm cuff: Approximately 5.8 oz. (163 g)
Monitor: Approximately 7.5" (w) × 3.3" (h) ×
4.7" (l) (191 mm × 85 mm × 120 mm)
Arm cuff: Approximately 5.7" × 20.9" (air
tube: 29.5") (145 mm × 532 mm (air tube:
750 mm))
9" to 17" (22 to 42 cm)
Stores up to 100 readings per user
Monitor, Easy Wrap ComFit Cuff, AC adapter
(HEM-ADPTW5), 4 "AA" batteries,
instruction manual, quick start guide
Internally powered ME equipment (When
using only batteries)
Class II ME equipment (AC adapter)
Type BF (arm cuff)