Publicité
Picture 5
Picture 7
FITTING INSTRUCTIONS
Starting from the Left hand side of the bike, remove the three bolts arrowed in
picture 1 and gently remove the side panel. Repeat the procedure for the RHS
panel.
Remove the black plastic cover that is positioned in front of the fuel filler cap, as
arrowed in picture 2.
Remove the four bolts arrowed in picture 3. Remove both top side panels off by
gently sliding them forward.
Starting from the LHS, Remove the two bolts arrowed in picture 4. Repeat the
procedure for the RHS.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
A
R&G Racing
www.rg-racing.com
B
Picture 6
Picture 8
Email:
info@rg-racing.com
Publicité
