Publicité
- remove any possible cause of overheating, eg. something covering the heater;
- check for damage to the appliance, the cord and the plug.
• If there is no damage:
- plug the unit back in;
- switch it on as described above.
If the heater still does not turn on, please contact Customer Service for assistance.
6 - SAFETY CONTROL
(ANTI-OVERTURNING SWITCH)
• If the appliance falls or overturns, the anti-overturning switch is activated and automatically turns
it off.
• It is necessary to place the appliance in vertical position to resume normal operation.
7 - MAINTENANCE AND CLEANING
Before performing any cleaning or mainte-
nance intervention on the appliance, discon-
nect the plug from the power socket and wait
for the fan to stop completely.
• If the appliance is very dirty, it is possible to use a cloth dampened with warm water (max
50°C) and a mild detergent to clean its external parts. Dry with a dry cloth.
Use a brush or a vacuum cleaner to remove dust from the radiant wings (2)
•
• Make sure the appliance is completely dry before reconnecting the
plug to the power socket.
• Do not use a chemically treated or antistatic cloth to clean the
appliance.
• Do not use petrol, solvents, polishing pastes or similar. These
products could break or deform the plastic surface.
• Do not use oils, chemical substances or abrasive products to clean
the appliance.
• Neither wash nor immerse the appliance with/in water.
• In case of an appliance malfunction, do not try to disassemble it but
instead refer to the retailer or to the technical assistance service.
It is advised to empty and replace water in the tray (7) every 3-4 days.
8 - TECHNICAL DATA
• See the table in the following page.
EN - 6
.
Publicité
