Publicité
2 - INSTALLATION
• After removing the packaging, check that the appliance is in perfect condition; in case of doubts
do not use it and refer to professionally qualified personnel.
• Do not use the appliance without having mounted the supports and
the wheels first.
• Entirely straighten the power cord.
• Place the appliance in an appropriate environment and on a stable and flat surface.
• Make sure that curtains or other objects do not obstruct the air flow (fig. 2).
• Leave at least 1m of free space on the sides, behind the appliance and above it (fig. 1).
•
Make sure the knob (14) is set to "O" and the knob (13) is set to "MIN".
• Connect the plug to the power socket.
• Make sure the mains data correspond to
what is described on the data plate of the
appliance.
• Arrange cord away from traffic areas so
that it will not be tripped over.
3 - USE
Knob "14"
• Knob set to "O" :
• "ECO-MODULATING" :
• "MEDIUM POWER" function :
• "MAXIMUM POWER" function : rotate the knob to " • • " position.
• "TURBO"
(Only for 9 Turbo Timer)
Knob "13"
• Thermostat
Knob "7" - Mode
• By means of the switch (12) it is possible to select three different modes.
4 - "TIMER" MODE
• This appliance is equipped with an interval timer (24h), the knob (7) is composed of 96 segments
and each segment represents 15 minutes.
For further information, please consult the "Manual for use and maintenance"
of the appliance.
5 - OVERHEAT PROTECTION
• This heater is protected with overheat protection that switches off the appliance automatically in
case of severe overheating. In this case:
- unplug the appliance;
- wait about 30 minutes for it to cool;
appliance OFF
rotate the knob to " ECO " position.
rotate the knob to " • " position.
: rotate the knob to " • •
" position.
CALDORAD
EN - 5
Publicité
