Publicité
Handling measuring
64 •
All manuals and user guides at all-guides.com
• Perform function controls regularly as
• Ensure that there is no heat source in the
• Avoid rapid temperature fluctuations. When
• Caustic detergents may damage the surfaces.
WARNING!
results
Patient hazard
This device is no diagnostic device. It simply
assists the treating physician in establishing a
diagnosis.
– In order to make a precise diagnosis and
– The responsibility for diagnosis and treatment
ATTENTION!
Loss of data
• Before you save measurements aquired with
• If measurement values are transmitted to the
described in the relevant section in this docu-
ment. Do not operate the device if it is dam-
aged or not working properly.
immediate vicinity. Do not expose to direct
sunlight. The excessive temperature could
damage the electronics.
the device is transported so that a tempera-
ture difference of more than 20 °C occurs, it
must stay turned off for at least 2 hours before
it can be turned on again. Otherwise, conden-
sation water will form which can damage the
electronics.
Only use a soft cloth dampened with mild
soapsuds to clean the surfaces of the device.
initiate therapeutic measures, besides
determination of the weight, further targeted
examinations must be set up by the
physician, and their results must be
considered.
lies with the treating physician.
this device and process them for further use
(e.g. in the PC software
hospital information system), make sure the
measurement values are plausible.
PC software or a hospital
seca analytics
information system, make sure prior to further
use that the measurement values are plausi-
ble and are assigned to the correct patient.
or in a
seca analytics
Publicité
