Publicité
FOR INSTALLERS AND PROFESSIONALS
4.4.3. AP Mode
Activate Wi-Fi module
c) When switched on, tap any key to wake up the controller, then press
and
will be flashing slowly to enter Wi-Fi binding status.
d) Click "Add device", and follow the instructions below to finish binding.
screen once the Wi-Fi connection success.
Note: If it doesn't jump automatically, click "Confirm hotspot connection, next".
4.4.4. If connect fails, please make sure your network name and password are correct. And your
router, mobile phone and device are as close as possible.
4.4.5. Wi-Fi rebinding (When Wi-Fi password changes or network configuration changes)
Press
for 10 seconds,
original binding will be removed. Follow steps above for rebinding.
Remarks: Please make sure the router is configured at 2.4 GHz.
will be flashing slowly for 60 seconds. Then
27
for 10 seconds,
display on the
will be off. The
Publicité
