Publicité
FOR INSTALLERS AND PROFESSIONALS
board, please pay attention; put the drainage kit firmly into the drain hole of the bottom board,
and then connect the drain pipe to drain away the condensed water smoothly.
Steps to install the foot and place it on the ground:
3. Align the foot to the mounting hole of the dehumidifier chassis and screw it in the clockwise
direction (do not flip the equipment to install!).
A：Power Cord；B：Drain Outlet (Connected with drain pipes)
4. Connect the drain pipe and connect the power cord according to the cable diagram.
Steps of installation on the wall：
5. On the appropriate wall, mount the bracket to the wall by attaching five φ6mm pull-out
screws to the holes in the wall bracket.
6. Place the pad on the wall-mounting platform behind the equipment
16
Publicité
