Publicité
FOR USER
F. Under the heating + dehumidifying mode, press the
number flashes, press
after 5 seconds without button operation. Press
or
to set the desired temperature before the flashing stops and automatically confirm
and exit after 5 seconds without the button operation.
11. The
symbol will be displayed on the screen when the electric heater is turned on. Under
the heating + dehumidifying mode, when the compressor operating frequency is below 50%, the
electric heating will run at 100% output power; when the compressor operating frequency is
above 50%, the electric heating will run at about 70% output power. (Remark: heating function
is available only with electric heater)
(Note: When the outlet temperature is ≥65°C, it will enter the air outlet overheat protection
system and stop (compressor and electric heating will stop). When the outlet temperature is
≤50°C, the protection will withdraw and normal operation will resume)
12. Timer Setting
(6) Timer ON setting: When the dehumidifier is on or off, press the "
Meanwhile, the symbol
the
and
minute setting by pressing
keep lighted, Timer on setting completely. (If you don't press
timer setting will fail then withdraw automatically.)
(7) Timer OFF setting: When the dehumidifier is on or off, press the
Meanwhile, the symbol
Timer OFF setting, the
, then press again the
and press the
or
to set the desired humidity. Automatically confirm and exit
light and the
to adjust Timer ON hour setting, then press
or
, then press the
light and the
is flashing, you can adjust the hour setting by pressing the
, then you can adjust the minute setting by pressing
, the
will keep lighted, the Timer off setting completed. (If you don't
for the first time, the humidity
, the temperature number flashes, press
are flashing to enter the Timer ON setting. Press
for three times, the
are flashing. Press
8
" to enter the timer setting;
, you can adjust the
or
to adjust the time,
to enter the timer setting;
two times to enter the
or
will
and
,
Publicité
