Publicité
Offer up the black plastic cover to the underside of the nose, ensuring to correctly locate the
plastic boss through the rubber mounts, before re-fitting the three bolts and tightening.
Re-fit the two black plastic side panels by offering up into place and sliding rearwards to locate
the plastic mounts. Once in place, re-fit the two bolts at the top.
Re-fit the black plastic cover that is positioned in front of the fuel filler cap.
Ensure all bolts are tight and that the bodywork is correctly mounted and secured.
FITTING INSTRUCTIONS FOR OCG0026BK OIL COOLER GUARD
DUCATI MULTISTRADA ENDURO 2016-
`
Picture 1
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
ISSUE 1 21/07/2015 (AR)
In This Kit there should be:
1 x Oil Cooler Guard (OCG0026BK)
2 x 100mm Length of self-adhesive foam
2 x Cable Ties
1 x Rubber Trim (SRS003)
Tools Required
Cable cutters
Metric Allen key set
R&G Racing
www.rg-racing.com
Picture 2
Email:
info@rg-racing.com
Publicité
