Publicité
3.3.
Working with the device
WARNING! A burning smell may be detected during first use. This is normal and should
disappear after a short time. Ensure that the room is well ventilated.
1) Install the power supply cable by plugging the 3 pin end to the socket in the case of the device.
2) Place the container inside the device.
3) Fill the container with the required food product.
4) Close the device with the cover.
5) Plug the power supply plug into the wall outlet.
6) Switch the device on using the ON/OFF button (only for the RC_BM_01 model; the RC_BM_02 model
is switched on with the temperature control knob).
7) Set the desired temperature.
CAUTION! During heating the indicator light will be turned on. If it is turned off it means that the contents
of the container reached the desired temperature. If the contents cool down and their temperature drops,
the device will restart heating to reach desired temperature and the indicator light will turn on again.
3.4.
Temperature adjustment panel
RC_BM_01
1 - On/off switch
2 - Heating indicator light
3 - Reset button ("RESET") – stops operation of the device
4 - Temperature regulating knob
EN
Publicité
