Publicité
WARNING! or CAUTION! or REMEMBER! Applicable to the given situation.
(general warning sign)
Wear protective gloves.
ATTENTION! Electric shock warning!
ATTENTION! Hot surface, risk of burns!
Only use indoors.
2. Usage safety
ATTENTION!
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury or even death.
The terms "device" or "product" are used in the warnings and instructions to refer to:
Bain Marie
2.1.
Electrical safety
a)
The device plug must fit into the socket. Do not modify the plug in any way. Original plugs and
matching sockets reduce the risk of electric shock.
b)
Avoid touching earthed items such as tubes, radiators, heaters and refrigerators. There is an increased
risk of electric shock if your body is earthed and touches the device exposed to direct rain, wet floor
and humid environment. If water penetrates into the device, there is an increased risk of damage to
the device and electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Do not use the cable in a wrong way. Never use it to carry the device or to pull the plug out of the
socket. Keep the cable away from heat sources, oil, sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
e)
If you cannot avoid using the device in a wet environment, use a residual current device (RCD). Using
an RCD reduces the risk of electric shock.
f)
Do not use the device if the power cable is damaged or shows clear signs of wear. A damaged power
cable should be replaced by a qualified electrician or the manufacturer's service.
g)
To avoid electric shock, do not immerse the cable, plug or device itself in water or other liquid. Do not
use the device on wet surfaces.
h)
CAUTION - DANGER TO LIFE! When cleaning or using the device, never immerse it in water or other
liquids.
2.2.
Safety in the workplace
a)
Keep the work area tidy and well lit. Disorder or poor lighting can lead to accidents. Be careful, watch
what you are doing and use common sense when working with the device.
b)
If in doubt as to whether the device is working properly, contact the manufacturer's service.
c)
Repairs to the device may only be carried out by the manufacturer's service. Do not carry out repairs
yourself!
d)
In the event of fire or fire, use only powder or snow (CO2) extinguishers to extinguish fire in the device
where there is voltage.
e)
Check the condition of the safety stickers regularly. Replace them if they are illegible.
EN
Publicité
