Publicité
RC_BM_02
1 - Temperature regulating knob
2 - Heating indicator light
3 - Reset button ("RESET") – stops operation of the device
3.5.
Cleaning and maintenance
a)
Before cleaning and when the device is not in use, pull the power supply plug.
b)
Use only non-corrosive agents for cleaning the surface.
c)
Only mild cleaning agents designed for cleaning surfaces which come into contact with food may be
used to clean the device.
d)
After each cleaning, all components should be well dried before the device is used again.
e)
Store the device in a dry and cool place protected from moisture and direct sunlight.
f)
Do not spray the device with a stream of water and do not immerse it in water.
g)
Regularly inspect the device for technical failure and damage.
h)
Use a soft, damp cloth for cleaning.
i)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or metal scraper) as these may
damage the surface of the device.
j)
Do not clean the unit with acidic substances, medical products, thinners, fuel, oil or other chemicals as
they may damage it.
k)
After completing operation of the device wait until it cools down completely, remove the container
and clean it thoroughly.
3.6.
Disposing of used devices
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The
plastics used to construct the device can be recycled in accordance with their markings. By choosing to
recycle you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
EN
Publicité
