Publicité
6
Initial Operation
1
Turn the water valve to the left and see if there is any water leaking from the hose.(① ~ ⑤)
①
②
③
④
Water supply valve
2
Connect the power cord to the 120V electric outlet.
• If the power light does not appear after plugging in the electric cord,
press any button on the remote control.
• If you hear a 'beep' sound, then the lights will appear on the
power lamp.
3
If you press
or
button, the water will begin to enter the heated water tank.
• If the tank is full, then a low beeping sound will occur which indicates that
preparation is complete.
4
Function Check
• In order to check whether the functions work, you will first need to touch the seat or sit on it to
TM
TM
activate the skin sensor.
• Please be aware that water will come out. This product can only operate when the user sits on the
electronic toilet seat.
12
⑤
7
Separation of unit from the toilet bowl
※ Please follow the instructions below when moving or separating the unit from the toilet for cleaning purposes.
1
Disconnect the power plug.
2
Shut the water supply valve.
3
Push and hold the button on the right side of the unit to
completely drain the water from the water tank.
4
Loosen the nut on the hose that is connected to the unit,
and then separate the electronic toilet seat from the toilet in
the following order as illustrated.
Do not turn the seat upside-down. This can cause damage to the unit as well as fire hazard.
Unit separation button
• While pushing the button (area shown as an arrow) push the electronic toilet seat slightly toward to the
front and then the body unit will begin to slide out.
Next, lightly pull the unit toward the front and it will detach from the toilet.
5
Unplug the T-valve from the water supply. (Refer to page 10~11)
6
Connect the water hose to the toilet directly and turn the water valve to the left to open it.
See if there is any leaking from the water hose connection.
7
Install the new toilet seat and lid.
• As explained above, steps 1~4 are instructions for separation of the unit for basic cleaning purposes,
and steps 5~7 are instructions for separation when moving, etc.
E
N
G
L
I
S
H
Unit separation button
13
Publicité
