Télécharger Imprimer la page

SmartBidet SB-1000 Guide D'utilisation Et Manuel D'installation page 5

Bidet électronique

Publicité

4
Product structure and designations
Main unit
FRONT
REAR
TURBO
Different types
of nozzles
(refer above)
Product components
For plumbing
For product fixation
Cone packing
Nuts
(2pcs)
(2pcs)
T-Valve & packing
Bidet hose
Mounting bolts
Base Plate
(2pcs)
8
Caution label
Lid
Warm air dryer
Drain / Unit
Separation Button
Skin sensor is
imbedded in seat
Heated seat
For remote control
Installation instructions
Bolt Case
TM
Remote control
(2pcs)
TM
User manual
TM
Q
Remote control holder
1.5V AAA type
Quick guide
(1pcs)
Battery (3pcs)
(for installation)
Remote control
Caution
If the remote control is not used for 10 seconds, the LED lamp will turn off automatically to protect the battery life.
TM
TM
TM
TM
TM
TM
TM
TM
TM
TM
TM
• Always sit on the middle of the unit and do not sit on the side of the seat.
TM
(The basic functions will not work if the skin sensor is not active.)
TM
TM
• When operating REAR / FRONT / TURBO, if the water temperature is low and cold water comes out after using it for a period of time,
pause and wait for 3 minutes for warm water to be provided.
• Drying will occur quicker if toilet paper is used to wipe away excess water prior to using the dryer function.
Sitting on the heated seat or using the dryer for an extended period of time can potentially cause low degree burning.
Special precautions should be taken for children, those who cannot adjust the temperature, and those who have sensitive skin.
Press 'STOP' to stop 'REAR', 'FRONT',
STOP
'TURBO' and 'DRY' functions.
REAR
It is used for posterior cleaning.
FRONT
It is used for front cleaning.
It is used for a focused wash with stronger
TURBO
water pressure.
Dryer will activate and automatically stop
DRY
after 1 cycle.
During a wash cycle, the nozzle will move
OSCILLATE
back and forth to cover wider cleaning area.
ECO
Pressing Energy Saving on or off activates
MODE
or deactivates the Energy Saving mode.
WATER
The water pressure and dryer temperature
PRESSURE
can be adjusted up to 5 levels.
DRY TEMP
NOZZLE
The oscillating mode and nozzle position can
POSITION
be adjusted up to 5 levels.
WATER
The water temperature can be adjusted up to
TEMP
4 levels.
SEAT
The seat temperature can be adjusted up to
TEMP
4 levels.
E
N
G
L
I
S
H
9

Publicité

loading

Produits Connexes pour SmartBidet SB-1000