Publicité
English
Up and Volume Down buttons until the right contact
is displayed.
NOTICE:
If "X" precedes the contact, the contact is in
Do Not Disturb (DND) mode and a reject tone
sounds when PTT button is pressed.
3 Press and hold the PTT button to make the call.
The green LED lights up.The display shows the
caller alias.
4 Wait for the Talk Permit Tone to end and speak
clearly into the microphone.
5 Release the PTT button to listen.
6.2.2
Responding to Private Calls
When you receive a Private Call:
•
The green LED blinks.
•
Your radio generates an inbound call alert tone before
the inbound audio call.
32
•
You hear a short alert tone the moment the transmitting
radio releases the PTT button, indicating the channel is
free for you to respond.
1 To respond to the call, press PTT button.
The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone.
3 Release the PTT button to listen.
NOTICE:
The call ends when there is no voice activity
for a predetermined period.
6.3
Broadcast Calls
A Broadcast Call is a call from an individual radio to every
radio on the channel.
Broadcast Calls are used to make important
announcements, that require your full attention. You cannot
respond to Broadcast Calls.
Publicité
