Télécharger Imprimer la page

Kärcher K 6.85 M Mode D'emploi page 16

Masquer les pouces Voir aussi pour K 6.85 M:

Publicité

Operation
Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Illustrations on Page 2
1 Coupling element for water connection
2 Fine filter in the water connection
3 Storage for accessories
4 Water connection
5 Appliance switch "0/OFF"/ „I/ON"
6 Storage for trigger gun
7 Transport handle
8 Detergent suction hose (with filter)
9 Dosage regulator for detergent
10 Detergent Tank
11 Storage for mains connection cable
12 Mains cable with mains plug
13 Storage for spray lance
14 Hose drum
15 hand crank for hose drum
16 Bearing wheel
17 High pressure hose
18 Trigger gun
19 Lock trigger gun
20 Key to detach the high-pressure hose
from the trigger gun
21 Washing brush
22 Spray lance with dirt blaster
23 Spray lance with pressure regulation
(Vario Power)
24 Storage for accessories
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your Kärcher dealer for further information.
16
English
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on fold-out
pages!
Illustration
Insert holder for trigger gun.
Illustration
Insert the transport handle and screw
in.
Illustration
Lock the detergent tank in place on the
appliance.
Close the detergent tank with the lid.
Illustration
Attach the accessories holder.
Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high-pressure hose.
Water supply
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
Kärcher; or, as an alternative, a system
separator as per EN 12729 Type BA.
Note: Impurities in the water can damage
the high-pressure pump and accessories.
For protection, the use of the Kärcher water
filter (optional accessory, order no. 4.730-
059) is recommended.
Water supply from mains
Observe regulations of water supplier.
For connection values, see type plate/tech-
nical data.
Use a fibre-reinforced water hose (not
included) with a standard coupling.
(Minimum diameter 1/2 inch (13 mm),
minimum length 7.5 m).

Publicité

loading