Publicité
Once the replacement is complete, reassemble the components in the reverse
order of the one described in the removal.
Note: Follow the same procedure to replace the counter blade.
Note: To assemble the components, initially tighten the blade nut firmly
with the fixed wrench, then loosen it and tighten it slightly.
11.5. Preventive Maintenance Chart
Activity
Complete Unit – Visual Inspection
(condition)
Complete Unit – Operation Check
Complete Unit – Cleaning
Complete Unit – Authorized Service
Cutting System – Cleaning
Cutting System – Lubrication
Rack and pinion – Cleaning
Rack and pinion – Lubrication
Cutting blade – Sharpening
Cutting blade – Replacement
Counter-blade – Replacement
Counter-blade – Deburring
There is a gap between the blade and the
counter blade – Check
There is a gap between the blade and the
counter blade – Adjustment
Blade screws, nuts, and locks – Replace-
ment
30/66
Period
Before use
Before use
After use / When necessary
Every 12 months
After use / When necessary
Before use / After use
After use / When necessary
Every 50 hours of use /
When necessary
Before use / After use /
When necessary
When the cutting blade no
longer crosses the count-
er-blade or shows signs of
wear while cutting
When necessary
When necessary
Before use / When
necessary
When necessary
When necessary
Publicité
