Publicité
•
Fire hazard. Do not store or carry batteries so metal
objects can contact exposed battery terminals. For
example, do not place batteries in aprons, pockets, tool
boxes, product kit boxes, drawers, etc., with loose nails,
screws, keys, etc. Transporting batteries can cause
fires if the battery terminals inadvertently come
in contact with conductive materials such as keys,
coins, hand tools, etc. Specific regulations prohibit
transporting batteries on airplanes (i.e., packed in suit-
cases and carry-on luggage) UNLESS they are adequately
protected from short circuits. So, when transporting
individual batteries, ensure the battery terminals are
protected and well insulated from materials that could
contact them and cause a short circuit. NOTE: Do not
put batteries in checked baggage.
7.1. Recommendations for storing batteries
• Store batteries in a clean, dry place and away from direct sunlight and excess
heat or cold.
• Store batteries out of reach of children.
• For storage periods of more than one month, store the battery with a half
charge. This extends battery life.
8. Intended use
8.1. Safe use
Follow the instructions below to use Jacto PB-25 safely, prevent accidents,
damage the equipment, and have the warranty void.
•
Jacto PB-25 was designed exclusively to prune bushes and
branches with less than 25 mm in diameter. Any other use not
recommended in this manual is considered misuse.
•
Do not exceed 10,000 cuts daily without cleaning the rack and pinion
to avoid excess accumulation of waste.
•
This product is meant to make cuts in light pruning of adult and young
fruit trees in temperate climates. Its cutting capacity is also affected
by the wood's hardness.
•
Do not use Jacto PB-25 to cut materials other than wood, such as
plasticized items, metals, glasses, etc.
•
Do not operate or have Jacto PB-25 operated by people without
proper training, non-authorized people, or people in poor health.
•
Do not operate Jacto PB-25 using ladders or supports which do not
ensure stable balance.
•
Do not operate in areas where potentially explosive atmospheres
can form.
•
Do not operate the shears in the rain or in excessive humidity. Jacto
PB-25 is not waterproof.
•
Do not alter, tamper with, or evade safety devices provided by the
manufacturer.
•
Do not ooperate it when the labels or warning signs are missing or
damaged. Replace them immediately with another sticker with the
same meaning.
•
Do not touch, in any way, the moving parts of Jacto PB-25 while
working.
•
Do not manipulate, remove, damage, or ignore the use of any part
of Jacto PB-25.
•
Do not place iron parts or other foreign bodies under the cutting
blade while the equipment operates.
•
Do not transport Jacto PB-25, holding it by the power supply cable.
•
Do not use the power cable for purposes other than those for which
it was intended.
22/66
•
Do not place the power cable near heat sources, oil, or sharp edges.
Damaged cables increase the risk of electrocution.
•
Do not leave Jacto PB-25 without supervision: the shears must be
under the control of a fit person at all times during use.
•
Do not use Jacto PB-25 when weather conditions are not favorable.
The equipment was designed to operate in dry environments
protected from weather conditions.
•
Do not expose the charger to high humidity, rain, or snow levels.
•
Do not place the battery charger near ignition sources or flammable
products.
•
Do not submerge or expose the battery to water or other liquids.
•
Do not touch the battery while Jacto PB-25 is charging.
•
Follow all recommended and described accident prevention guide-
lines in this manual.
•
Check if all safety devices of Jacto PB-25 are intact and working
before using it.
•
Make sure where Jacto PB-25 is being used is adequately lit. Excessive
or insufficient brightness can represent risks to the operator.
•
Keep Jacto PB-25 away from children and animals.
•
Get familiar with command features and devices before starting
any operation.
•
Wear appropriate clothing. Avoid excessively long clothes or
loose, which may get caught somehow in moving or rotating parts.
•
Wear appropriate clothing and PPE as described in item 8.5 of this
manual.
•
Use the equipment correctly and safely during operations and
ensure your balance.
•
Ensure the terrain where you work is free from impediments that can
make the operation difficult.
•
Keep Jacto PB-25 blades and moving parts away from your face and
any exposed person.
•
Clean Jacto PB-25 periodically, following the schedule and methods
described in this manual.
•
Disconnect Jacto PB-25 from the power source for maintenance
or adjustment.
•
Stop using Jacto PB-25 and inspect it if you notice any abnormal
situation or vibration. Personnel authorized by the manufacturer
must examine it to identify and eliminate the causes.
•
Contact the dealer if Jacto PB-25 stops working or if any compo-
nent is damaged.
•
Comply with the laws in force in the country where products used for
cleaning and servicing Jacto PB-25. Comply with the manufacturer's
recommendations about the product.
•
Only qualified and authorized personnel must carry out maintenance
in Jacto PB-25 strictly following the instructions in this manual. Replace
any worn-out or damaged parts.
•
Always use original parts for repairs and maintenance.
•
After finishing operations, correctly store Jacto PB-25 and the battery
in its packaging and keep them safe from weather conditions.
Publicité
