Publicité
Use this saw only as in-
tended. Unintended use
may result in personal injury and property
damage.
This product is intended to cut wood, lami-
nate flooring, plastics, flat stock non-ferrous
materials such as aluminum and copper with
maximum thickness of 0.0787 in (2 mm).
This product is not intended to cut masonry,
stone, or tile.
Cutting Masonry
Do not cut masonry with
this circular saw. The
dust from masonry cutting may cause the
lower guard to become sluggish and not
close fully.
8
1600A034F3 CS12V 20240723.indd 8
page heading
Intended Use
tended for usage with metal or masonry cut-
off wheels.
ter feed devices with this circular saw. Ma-
sonry cutting waste will enter the lower
guard system, harden and cause the guard to
become inoperable. Use of water in masonry
cutting applications with an electric circular
saw will cause electric shock hazards.
This tool is not intended for usage with metal
or masonry cut-off wheels.
Do not use the Dremel Ultra-Saw, or Saw Max
blades with this tool.
SAVE THESE INSTRUCTIONS
Do
not
use
abrasive
wheels. This tool is not in-
Do not use Wet Diamond
cutting off wheel or wa-
7/23/24 9:03 AM
Publicité
