Publicité
nals with heavy insulating tape to prevent
shorting.
LITHIUM-ION BATTERIES
If equipped with a lithium-ion battery, the bat-
tery must be collected, recycled, or disposed
of in an environmentally sound manner.
"The EPA certified RBRC Bat-
tery Recycling Seal on the lithi-
um-ion (Li-ion) battery indicates
Robert Bosch Tool Corporation
is voluntarily participating in an
industry program to collect and recycle these
batteries at the end of their useful life, when
The following label is on your laser tool for
safety. ALWAYS BE AWARE of its location
when using the laser.
DO NOT direct the laser beam at persons
or animals and do not stare into the laser
beam yourself. This tool produces Class 1
laser radiation and Complies with 21 CFR
1040.10 and 1040.11 except for confor-
mance with IEC 60825-1 Ed. 3., as described
in Laser Notice No. 56, dated May 8, 2019.
This can lead to persons being blinded.
Use of controls or adjust ments or perfor-
mance of procedures other than those
specified herein may result in hazardous
radiation exposure.
DO NOT remove or deface any warning or
caution labels. Removing labels increases
the risk of exposure to laser radiation.
ALWAYS make sure that any bystanders in
the vicinity of use are made aware of the
dangers of looking directly into the laser
tool.
DO NOT place the laser tool in a position
that may cause anyone to stare into the la-
ser beam intentionally or unintentionally.
Serious eye injury could result.
Never aim the beam at a workpiece with
a reflective surface. Bright shiny reflective
sheet steel or similar reflective surfaces are
1600A034F3 CS12V 20240723.indd 7
page heading
Additional Safety Warnings
Specific Safety Warnings for Laser
SAVE THESE INSTRUCTIONS
taken out of service in the United States or
Canada. The RBRC program provides a con-
venient alternative to placing used Li-ion bat-
teries into the trash or the municipal waste
stream, which may be illegal in your area.
Please call 1-800-8-BATTERY for informa-
tion on Li-ion battery recycling and disposal
bans/restrictions in your area or return your
batteries to a Bosch/Dremel Service Center
for recycling. Robert Bosch Tool Corpora-
tion's involvement in this program is part of
our commitment to preserving our environ-
ment and conserving our natural resources"
not recommended for laser use. Reflective
surfaces could direct the beam back to wards
the operator.
ALWAYS position the laser tool securely.
Damage to the laser tool and/or serious in-
jury to the user could result if the laser tool
fails.
ALWAYS use only the accessories that are
recommended by the manufacturer of your
laser tool. Use of accessories that have been
designed for use with other laser tools could
result in serious injury.
DO NOT use this laser tool for any purpose
other than those outlined in this manual.
This could result in serious injury.
DO NOT leave the laser tool "ON" unat-
tended in any operating mode. ALWAYS turn
the laser tool "OFF" when not in use. Leav-
ing the laser tool "ON" increases the risk of
someone inadvertently staring into the laser
beam.
DO NOT disassemble the laser tool. There
are no user serviceable parts inside.
DO NOT modify the product in any way.
Modifying the laser tool may result in haz-
ardous laser radiation exposure.
DO NOT use any optical tools such as, but
not limited to, telescopes or transits to view
the laser beam. Serious eye injury could re-
sult.
DO NOT stare directly at the laser beam or
project the laser beam directly into the eyes
of others. Serious eye injury could re sult.
7
7/23/24 9:03 AM
Publicité
