Publicité
APH 240.book Seite 13 Freitag, 10. August 2001 11:36 11
APH 240
11 Practical Tips
Do not drill into hidden electrical
lines or gas and water pipes.
Check the area to be worked with a
metal detector, for example, before
starting.
For metal, use only flawless, sharpened drills; for
stone and concrete, only masonry drills with hard
metal inserts.
Always adapt the speed to the material to be worked
and the diameter of the drill. For precision working
with metal and wood, place the machine in a drill
stand (accessory).
HAMMER- DRILLING
Wear protective glasses and
hearing protection.
Do not apply to much pressure.
The performance is not increased
in this manner.
For hammer drilling, work only with protective
glasses, hearing protection and the auxiliary
handle 10. Check before putting into operation if
the shift knob 4 is latched in the
DRILLING IN TILES
Start drilling slowly on the tile. After the tile is drilled
through, switch to impact drilling.
SCREWDRIVING
Screwdriver bits can be inserted into the adapter 18
(see accessory). Commercially available bits with a
hexagonal dimension of 6.3 mm or 1/4" (DIN 3126,
Form C) can be used.
The screwdriver bits are held in the adapter with a
spring ring. Therefore, use only bits with a notch.
12 Slip Clutch
If the drilling tool become jammed or get caught, the
slip clutch releases.
Remove the load from the machine immediately by
pulling back the drilling tool.
Always hold the machine tightly with both hands and
assume a secure stance.
13 Maintenance Measures
Before all work on the machine itself,
always set the rotational direction switch 7
to the middle position.
Always keep the ventilation slots clean.
Wipe off the accessible plastic parts regularly with a
cloth without cleaning agent.
After heavy use over a long period, the machine
should be taken to a Kress service location for an
inspection and thorough cleaning.
14 Environmental Protection
position.
Do not open battery and dispose of it through the
available collection points.
Do not place the battery on any heated surface or
expose it to strong sunlight for a longer period of time.
Do not expose the battery to temperatures over 50 °C.
Give your worn-out Kress machine to your dealer or
send it directly to Kress.
Subject to change without notice
English
Kress takes back worn-out machines
for the purpose of resource-saving
recycling. As a result of their modular
construction, Kress machines can be
very easily dismantled into their reusa-
ble materials.
Defective
Akku
rechargeable
batteries must
be recycled
Recycling
according to the
Guidelines
91/157/EEC.
Do not throw
used batteries in
household waste,
in fire or in water.
13
Publicité
