Publicité
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Replacing plate
Optional accessory
1.
Loosen the screws securing the plate and remove
the plate.
2.
Attach the strap washer, the carbon plate and the
cork rubber plate or the steel plate to the screw
holes of the tool with screws as shown in the
figure.
5
6
Fig.36
► 1. Screw 2. Strap washer 3. Carbon plate 4. Cork
rubber plate 5. Steel plate 6. Screw hole
NOTE: The plate installed at the shipment differs
from country to country.
1
2
4
OPTIONAL
ACCESSORIES
CAUTION:
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Sanding belts
•
Guide rule
•
Clamp
•
Sanding shoe
•
Carbon plate
•
Cork rubber plate
•
Hose complete 28
•
Front cuffs
•
Wireless unit
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
3
MAKITA LIMITED
WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
20 ENGLISH
These accessories or attachments
Publicité
