Publicité
2.7 STARTING THE WASHING PROGRAM - FILLING THE BOILER
•
Check that the suction filter, in the tank, has been placed in the correct
position.
•
Check that the overflow hose is inserted correctly in its inlet.
•
Make the connection with water supply and drainage according to the
instructions.
•
Push ON-OFF switch (No.1 - Page 3)
•
The dishwasher is automatically filled with water up to the set water level.
•
The indicator lights on (N.4 - Page 3) showing us that the boiler's heating
has started.
•
When the water of the boiler is heated, the corresponding LED lights off
(N.4 - Page 3) and a new LED lights on (N.5 - Page 3) showing us that the
water in the dispenser is heating up.
Note 1: At the model 35 (basket 35 x 35) the indicator (No. 4 - Page 3) continues
to light on while the boiler is heating.
•
When this LED lights off, then the dishwasher is ready for wash.
•
Open the door. Insert the basket with the items (dishes, glasses, etc.). Before inserting the basket with the
items, be sure that all food residues have been removed.
•
Add the liquid detergent manually in the dispenser, unless the dishwasher has a detergent pump. Check the
level of the rinse aid and detergent storage compartment.
•
In order for the washing program to start, push the START button (No. 2 - Page 3). At the model 1500 (Hood
type) the washing program starts closing the door.
•
The washing program, lasting 2 min., starts automatically, while at the same time the LED (N.6 - Page 3) of
the program's start lights on, washing and rinsing the items inserted.
Note 2: If the door does not close properly, the dishwasher does not function and the LED (No. 7 - Page 3) lights
on.
•
When the washing program is finished, the program LED (N.6- Page 3) lights off. Open the door and remove
the basket with the clean items.
•
Let them dry.
If, following the wash, there are stains from dirt or water spots, the cause may be one of the following:
•
Wrong quantity of detergent in respect of water.
•
Rinsing water with high capacity of mineral elements.
•
Insufficient quantity of rinse aid during rinsing.
•
Wrong loading of the items in the basket.
•
Low water pressure during rinsing.
•
Low water temperature during washing.
•
Filters are clogged or miss-positioned.
RECOMMENDATION: For a better result, especially with glasses, use water softener.
www.combisteel.com
9
Publicité
