Publicité
2.8 SAFETY ARRANGEMENTS
There is a safety adjustment at the door, which interrupts the appliance's operation during washing, if the door
opens by mistake.
There is thermal protection integrated in the pump motor winding with automatic start-up, which interrupts
power supply to the pump, in case of overcharge.
There are thermal safety fuses, which interrupt the power supply in case of boiler or dispenser overheating.
2.8.1 FURTHER SIGNIFICANT INDICATIONS / SAFETY INDICATIONS
No technical modifications are allowed in this appliance. The manufacturer is not responsible for any possible
damages resulting due to modifications. The same applies in case that the appliance is used for any other
purpose except the one anticipated, in case of fault or improper use.
The water inside the dishwasher is not potable.
Use, maintenance and repair of dishwasher should be performed only by persons familiar with these works and
informed for any possible risks.
2.8.2 DAILY WORKS
•
Turn off the operation switch of the appliance (No.1- Page 3).
•
Turn off the main switch / fuses.
•
Turn off water supply faucet.
•
Empty the washing dispenser removing the overflow pipe after turning off the switch ON-OFF (No.1- Page
3) to avoid overcharging the tank and causing damage to the dishwasher.
•
If the dishwasher is equipped with draining pump, follow the above mentioned steps and then press the
start button once in order to start the automatically 2 minutes draining program. (ATT: during the draining
program the door must remain closed.)
2.9 MAINTENANCE / CARE / REPAIR
The perfect operation and safe use may be ensured only through the correct use of the appliance, as well as the
compliance with the operation instructions, the corresponding specifications and the care and cleaning
indications.
This applies both for the compliance of the provisions of law on appliance safety (GSG) and the existing
specifications of ZH 1 and VBG on accident prevention.
RECOMMENDATION: Before cleaning or maintenance works, the appliance should not be connected with
voltage through the installed main switch / fuse. The appliance should never be sprayed with water or high
pressure cleaning aid, because any insertion of water in the electrical elements may affect the regular operation
of the appliance as well as the protection against electrical shock (insulating protection).
We recommend that you prepare a relevant maintenance agreement for all maintenance and repair works with
our company (or with a service team / workshop of an authorized local dealer who sold the appliance).
All works / repairs performed in this appliance must be reported on the last page of the operating instructions,
along with the signature / company name.
Substantially, no safety arrangement should be put out of operation. If the disassembly of individual safety
arrangements is required, e.g. for maintenance or repair works, the reassembly of the relevant safety
arrangements should be performed immediately after the completion of works.
www.combisteel.com
10
Publicité
