Publicité
2.12 TROUBLESHOOTING
PROBLEM
The dishwasher does not operate
properly
The appliance operates, but the
switch LED does not light on
Boiler heating does not operate
Boiler heating operates, but LED
does not turn on
The 85°C thermal fuse is faulty.
The dispenser's fuse is burned out
Dispenser's heating operates, but
LED does not turn on
Pump motor does not operate
CAUSE
Connection interruption
You have not turned the switch
N1 of the appliance on
Main switch / or fuse has not
been activated / or it is faulty
The switch N1 of the appliance is
faulty
The water inlet valve is faulty
The door is not closed
You have not turned the water
supply on
The LED is faulty
Switch N1 or main switch or fuse
has not been activated
The safety thermostat of the
boiler is faulty
The 93°C thermal fuse of the
boiler is faulty
Pressure stator is faulty
'Boiler heating' relay is faulty
Boiler fuse is burned out
Faulty LED
Switch N1 of the appliance or
main switch or fuse has not been
activated
Boiler heating is open
The thermostat switch of 60°C
heating is faulty
'Compartment heating' relay is
faulty
Faulty LED
Main switch or fuse is not
activated. The door is not closed
Main relay is faulty
Pump motor is faulty
Program selection switch is faulty
www.combisteel.com
SOLUTION
Check the connection
Turn the switch N1 on
Check the main switch / or fuse
Refer to the authorized local
dealer who sold the appliance or
directly to the manufacturer
Close the door
Turn the supply on
Change the LED
Check the switch N1 of the
appliance and the main switch or
fuse
Refer to the authorized local
dealer or the manufacturer
Refer to the authorized local
Dealer who sold the appliance or
directly to the manufacturer
Change LED
Activate the corresponding switch
or fuse
Wait
Refer to the authorized local
dealer who sold the appliance or
directly to the manufacturer
Change LED
Activate main switch or fuse
Close the door
Refer to the authorized local
Dealer who sold the appliance or
directly to the manufacturer
12
Publicité
