Publicité
Inside the pram body, in the lower section (Fig.b), release the
rigid textile strip by pulling it along the entire perimeter, as
shown in the figure;
17 In the upper section (Fig.c), release the rigid textile strip by
pulling it first centrally (arrow 1) and then laterally (arrow 2),
then lift the fabric (arrow 3).
18 Open the zips on the upper edge of the pram body, first at
the head end (Fig.d) and then at the foot end (Fig.e).
19 Remove the net from the headrest (Fig.f ) and remove the
pram body's entire inner lining by pulling upwards (Fig.g).
REPOSITIONING THE LINING:
20 Reposition the lining in the pram body (Fig.a).
Close the zips on the upper edge of the pram body, first at
the head end (Fig.b) and then at the foot end (Fig.c).
21 Inside the pram body, in the lower section, first position the
fabric well under the headrest (Fig.d), then reposition the
rigid textile strip along the entire perimeter, as shown in the
figure (Fig.e);
22 In the upper section (Fig.f ), reposition the rigid textile strip
first laterally (arrow 1) and then centrally (arrow 2).
23 If lowered, raise the backrest slightly to allow the net to sit
snugly against the headrest and along the pram body (Fig.g).
Reposition the mattress (Fig.h).
24 WARNING: make sure the rigid supports are inserted
correctly. Insert the tube bearing the carry handle into the
hood's front slot, ensuring the handle is centred correctly.
25 Finally, slide the second metal support into the innermost
hood slot.
26 Fasten the hood to the appropriate supports and button all
the buttons on the lower profile, as shown in the figure.
Padding cleaning instructions
Brush the fabric parts to remove dust.
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents and do not tumble dry.
Product cleaning
• This product requires regular maintenance.
This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
• Remember to regularly ventilate the interior of the pram.
Product Disposal
To help protect the environment, after using the product
be sure to dispose of it in accordance with the instructions
provided by your local authorities.
The Original Accessory Peg Perego
Peg Perego accessories are designed as a useful, practical
means of simplifying the lives of parents. Discover all your
product's accessories on www.pegperego.com.
Serial numbers
27 Information about the production date of Culla Belvedere
can be found internally and on the side of the body by
pulling back the Culla Belvedere lining (Fig.a).
Stand by me reports information as at the date of
manufacture of the product (Fig.b).
Product name, production date and serial number.
This information is essential if you require assistance.
Peg Perego S.p.A.
Peg Perego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO 9001
standard. Peg Perego can make changes at any time to
the models described in this publication for technical or
commercial reasons.
25
Publicité
