Publicité
BEFORE THE FIRST USE
• Remove all packaging materials and any promotional stickers.
I
Caution: do not remove the rubber pads on the fryer grille. These are part of the device and
hold the grille in place.
• Clean the frying pan and grille using a soft cloth with warm water and a mild detergent.
• Wipe the inside and outside of the fryer clean with a soft cloth.
HANDLE INSTALLATION
• Remove the frying pan from the appliance. Remove the paper label.
• Slide the attachment point on the handle downward until it clicks
into place.
• Once locked the frying pan handle is locked into the handle, it
should not come loose.
USE
1. Place the appliance on a flat, stable and heat-resistant surface. Make sure that there is at least
30 cm of free space around the appliance.
2. Check that the grille is inserted in the fryer. Push the grille into place so that it sits level on the
bottom.
I
CAUTION: Do not place any oil or fat in the fryer.
3. Slide the frying pan with the empty grille inside the fryer.
I
CAUTION: Never use the frying pan without the grille inside.
4. Plug the power cord into a socket. A beep indicates that the device is in standby mode.
5. Remove the deep fryer from the device. Place the ingredients in the deep fryer with the roaster.
Do not put too many ingredients in the appliance so that the ingredients do not touch the
heating elements. Pay attention to the MAX indication in the deep fryer here.
6. Put the deep fryer with the filled roaster back in the device.
7. You switch on the appliance by pressing the on-off button.
8. Press the temperature +/- buttons to set the desired temperature. The display shows you the
temperature you set. Each press of a +/- button increases/decreases the temperature by 5 °C.
The temperature can be set from 80 to 220°C. You can also hold down the button to advance
the setting faster.
9. Press the timer +/- buttons to set the desired cooking time. The display shows you the time
you set. Each press of a +/- button increases/decreases the time by one minute. The timer can
be set from 1 to 60 minutes. You can also hold down the button to advance the setting faster.
10. Press the start/pause button to confirm. Three dashes then light up consecutively from left to
right on the display. This indicates the motor is running. It continues while the appliance is on.
The set timer and temperature appear alternately on the display.
NOTE: You can pause the appliance if you want to add/remove ingredients during use. Press the
start/pause button. The three dashes will flicker at the same time on the display to let you know
the appliance is paused. If you want the appliance to continue cooking, press the start/pause
button again.
11. You can take the fryer basket out of the appliance in between to shake up the ingredients or to
check how fried your food is. The appliance stops working automatically and will continue
44
www.domo-elektro.be
Publicité
