Installation Instructions - GF JRGURED UP 3/4 Notice De Montage

Application
The JRGURED UP pressure reducer is approved for the following parameters:
Art. No.
1380.320 1'600 kPa (16 bar)
* Temperatures up to 90°C are permissible for short periods during thermal disinfection
Designation
- ¾ (GN/valve size)
- JRG (manufacturer)
- (Flow direction arrows)
Factory settings
The pressure reducer JRGURED UP is factory-set to 300 kPa (3 bar) static pressure.

Installation instructions

When installing the JRGURED UP pressure reducer, local guidelines, regulations and
standards must be observed.
Installation
The pressure reducer JRGURED UP may only be installed with suitable tools.
Use assembly tool Art. No. 8140.000 when installing or removing the safety sleeve and the
pressure reducing cartridge.
PN P
sec
250-450 kPa (2.5-4.5 bar)
E
t *
max
70°C
33