Publicité
GB
STEP 3
Adjustment of seat inclination.
A
1. This rowing machine is designed for 4 incline positions in
the rear end. Fit the quick release knob (19) into the rear end
of main frame (1). Loosen the knob head of quick release (19)
a few turns and pull the knob head out. Lift the rear incline
adjuster (3) to the desired height position and align the holes to
lock the knob screw for desired incline position. Note: Do not
pull out the rear inclined adjuster (3) further than the marked
"stop" line (see drawing A).
3
19
1
STEP 4
Assembly of computer.
1. Take the computer (51) out of the packaging and insert
51
the batteries (Type "AA"-1.5 V pencells) by watching for the
52
right polarity on the back of the computer (51). (Batteries for
the computer are not included in this item. Please buy them
at your located market.) Connect the sensor cable (52) with
A
cable of the computer (51) and slide the computer (51) onto
the bracket (A) that is welded onto the front part of the main
frame (1).
1
CHECKS
1. Check the correct installation and function of all screwed
and plug connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the
machine at a low resistance setting and make your individual
adjustments.
Note:
Please keep the instructions in a safe place as these may be
required for repairs or spare parts orders becoming neces-
sary later. The computer switches o automatically approx. 4
minutes after training is stopped. All values attained until the
will be deleted.
Attention!
Never touch the hydraulic cylinder during or immediately after
the training, since it can get very hot depending the amount of
use. In some instances, despite strict quality control, it occurs
that small pieces of painting or other small particles will loosen
from moving parts or oil might drip from the hydraulic cylinders.
Thereore, please protect your oor or carpet by putting a mat
or wooden board underneath the product.
14
Publicité
