Publicité
Vertical steam
Can be used to remove creases from hanging clothes, curtains, etc.
1. Hold the iron in an upright position 15 cm away from the garment to be steamed.
2. Press the steam release button (12) repeatedly with pauses of at least 5 seconds.
Warning!: never point the steam jet at garments being worn, or at people or animals.
5"
15 cm
4. Energy saving
If the energy saving setting is selected, you can save energy and water and still achieve
good results when ironing most of your garments.
1. Press the energy saving button "Eco" (3). The indicator light will come on.
2. To switch back to the normal energy setting, press the "Eco" button again.
It is advisable to use the normal energy setting to get optimum results on thick and very
wrinkled fabrics.
Tips to help you save energy:
• If you tumble dry your fabrics before ironing them, set the tumble drier on the iron dry
programme.
• Try to iron the fabrics while they are still damp and reduce the steam setting. Steam will
be generated from the fabrics rather than the iron.
5. Extra shot of steam
If the "extra shot of steam" mode is activated, the appliance increases the steam dosage,
this is specially designed to remove the most persistent wrinkles in an easy and comfor-
table way.
1. Press the "Boost" button (3) for 5 seconds. The indicator lamp will flash.
2. To return to normal mode, press the "Boost" button again.
6. Auto switch off
For your safety and to save energy, the appliance switches off automatically when it has
not been used for 8 minutes.
Three beeps will be heard, and all indicator lights (1, 2, 3) will flash.
To switch the steam station back on, press the steam release button (12) again.
25
Publicité
