Publicité
4. When the iron is ready to use, the indicator light (2) will remain permanently lit. Two
beeps will be heard.
Important: During the first seconds of use the amount of steam will be lower and it will
increase progressively.
2x
3. Ironing
1. Press the steam release button (12) for ironing with steam.
Important: When placing the iron on the pad (10), be sure to first insert the heel in the upper
side of the control panel, as shown in the figure.
Tip: The most efficient way to iron with steam generators is to use the steam function in
a forward direction (the steam permeates the fabric and gives volume back to it) and in a
backwards direction without steam (fixing the fabric). This ensures that excessive steam is
released and the fabric dries faster while obtaining longterm crease protection.The poten-
tial build-up of condensed water can be avoided or at least minimized.
Warning: Ironing with an excessive amount of steam may produce condensation of the
hot water and dripping from the ironing board or through any other permeable surface. To
prevent scalds or burns, please follow the instructions in this user manual.
2
1
SteamBoost" function
This appliance has a special function for tackling difficult creases.
1. Press the steam release button (12) two times in quick succession (double-click). Power-
ful shots of steam will be released.
2x
24
Publicité
