Publicité
This appliance must be connected to an earthed socket. If it is absolutely necessary to use
an extension cable, make sure that it is suitable for 16A and has a socket with an earth con-
nection. The appliance must never be placed directly under the tap to fill the water tank.
The electrical plug must not be removed from the socket by pulling the cable. Never im-
merse the appliance in water or any other liquid. Do not leave the appliance exposed to
weather conditions (rain, sun, frost, etc.). This appliance reaches high temperatures and
produces steam during use, this could cause scalds or burns if not used properly. Do not
allow the power cable to come into contact with the soleplate when it is hot.
B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
INTRODUCTION
SmartCare for simple, fast and safe ironing. Discover the new way of ironing with Smart-
Care – no more changing the temperature of the iron and tedious pre-sorting! Now all
ironable materials, from ultra fine delicates to extra thick fabrics, are creasefree in a flash
with a single temperature setting. Which means more time to do other things.
USING YOUR APPLIANCE
1. Filling the water tank
This appliance has been designed to use normal tap water.
Important: Do not use additives! The addition of other liquids, such as perfume, vinegar,
starch, condensation water from tumble dryers or air conditioning systems, or chemicals
will damage the appliance. Any damage caused by the use of the aforementioned products
will make the guarantee void!
1. Open the filling lid (9).
2. Fill the water tank (7). Never fill beyond the level "max" (8) for maximum filling!
3.Close the filling lid.
Tip: To prolong the optimum steam function, you may mix tap water with distilled or de-
mineralised water 1:1. If the tap water in your area is very hard, mix tap water with distilled
or demineralised water 1:2.
2. Heating
1. The steam station is equipped with an iron lock system (11), release the iron by pressing
the button.
2. Unwind the supply hose (4) and the mains cable (5). Plug mains cable into an earthed socket.
3. Press the button (2) to switch the appliance on. The indicator light (2) will flash indica-
ting that the appliance is heating up.
23
Publicité
