Publicité
48
18.3
BLOWER AIRFLOW
IOM
IOM
DISCONNECT THE ELECTRICAL SUPPLY TO THE FURNACE BEFORE ATTEMPTING TO
CHANGE THE BLOWER SPEED. FAILURE TO DO SO COULD RESULT IN ELECTRICAL
ESP (in. WC)
0.5
0.1
ESP (in. WC)
0.5
0.12
ESP (in. WC)
0.5
0.2
Refer to Blower Airfl ow Specifi cation Sheet on the Napoleon website for more information.
18.4
CONTINUOUS FAN OPERATION
When the thermostat continuous fan (G) switch is on without a call for heat or cooling, the indoor fan is
immediately energized on low heat speed. The fan remains energized as long as the call for fan remains
without a call for heat or cooling. This feature allows continuous circulation of air between calls for heating or
cooling.
If a call for heat (W) occurs during continuous fan, the blower will remain energized, the call for heat overides
the call for fan.
If a call for cool (Y) occurs simultaneously with the call for fan (G), the call for cool overrides the call for fan.
See Air Flow Data table.
W415-2379 / B / 09.22.20
!
SHOCK RESULTING IN PERSONAL INJURY OR LOSS OF LIFE.
Low Heat (1)
High Heat (2)
Model: WSX040T2AA
167
477
515
637
Model: WSX060T3AA
Low Heat (1)
High Heat (2)
528
842
747
1002
Model: WSX080T3AA
Low Heat (1)
High Heat (2)
583
1028
755
1146
WARNING
!
TABLE 7A
1.5T Cool (3)
-N
364
549
-N
2.0T Cool (3)
680
860
-N
2.0T Cool (3)
712
866
FIGURE 33
H3.77
2.0T Cool (4)
2.5T Cool (5)
696
912
809
1013
2.5T Cool (4)
3.0T Cool (5)
1010
1209
1165
1327
2.5T Cool (4)
3.0T Cool (5)
931
1328
1068
1418
H22.3.3
Publicité
