Publicité
User manual
TIG Welding
DDC TIG welding requires protective gas shielding (Argon). Ensure that the torch is properly fitted and that the consumables (vice grip pliers, collet
bodies, diffusers and nozzles) are not worn out. It is necessary to use the optional polarity reversal cable accessory (a).
a
It is also possible to use an optional valve TIG torch. This must be connected to the negative polarity socket on the front of the power
source.
Translation of the original
instructions
400T G
a
GALAXY 400T G / 400T GW
400T GW
a
a
27
Publicité
