Publicité
User manual
a
MMA Welding
Ensure that the polarities and welding intensities indicated on the electrode packaging are observed. Remove the electrode from the electrode holder
when the machine is not in use. Do not connect the MIG-MAG or TIG torch when the machine is being used for MMA welding.
• The equipment is fitted with 3 inverter-specific features:
- Hot Start provides an overcurrent at the beginning of the welding process.
- Arc Force creates an overcurrent which prevents the electrode from sticking to the weld pool.
- The Anti-Stick technology makes it easier to unstick the electrode from the metal.
Process settings
Settings
Settings
Rutile
Electrode type
Basic
Anti-Sticking
ON-OFF
Access to some of the welding parameters depends on the selected display mode: Settings/Display mode: Easy or Expert. Refer to the HMI ma-
nual.
Translation of the original
instructions
400T G
Welding processes
Standard
Pulsed
a
400T GW
The type of electrode determines the settings in order to optimise its
weldability depending on the type of electrode used.
The anti-stick feature is recommended to safely remove the electrode in
the event of it sticking to the workpiece (the current is cut off automati-
cally).
GALAXY 400T G / 400T GW
25
Publicité
