Publicité
Cleaning intervals
The filter system 1Z is designed to minimize
maintenance while providing premium cleaning
performance and minimum energy consumption.
Depending on use habits and water hardness, the filter
system will require some maintenance to sustain
premium cleaning performance.
Your filter system may need to be cleaned when:
You notice food soils remaining on the filter system
▯
or objects trapped in the Large Object Trap.
A drop in cleaning performance or a gritty film forms
▯
on the dishware.
When washing normally attached food soils that have
been scraped before loading, in a household that runs
the dishwasher every other day, your filter should be
cleaned:
Cleaning interval
Usage
3- 6 times a year
light to average use
8-12 times a year
heavy use
Note: Clean the filter after washing loads with large
amounts of food soils or loads with a heavy starch
content to maintain optimal performance.
To check or clean the filter system:
1.
After each wash cycle check the filters for residue.
2.
Unscrew the Large Object Trap as illustrated and
remove the entire filter system.
3.
Remove the microfilter from the fine filter for easier
cleaning.
4.
Rinse the filters under running water and use a soft
brush to clean.
Note:do not use abrasive brushes or steel wool, etc.,
as they may damage the filter.
5.
Reinstall the filter system in reverse sequence and
lock into place by screwing the Large Object Trap
until the marking arrows align.
Care and Maintenance
en-us
37
Publicité
