Publicité
Switching on the appliance for the first
time
When you first turn on the dishwasher, you are taken
directly to the settings for switching on the appliance for
the first time. The following text is indicated on the
display window at the top @:
Scroll with < >
Set with + -
Leave with t 3 sec.
Settings
Switching on the
appliance for the first
time
Language
Time format
Time setting
Water soft setting
Rinse aid setting
--------
Settings
The dishwasher has been preset with certain settings
for your convenience. You can change these factory
setting.
Change the setting as follows:
1.
Open the door.
2.
Switch on ON/OFF switch (.
3.
Press Info button ( 8 for 3 seconds until the
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with t 3 sec.
Setting
Time setting
Time format
Time display
Language
Water hardness
Rinse aid disp.
Sensor setting
Extra dry
Eco forecast
Factory setting
American English
24h
12:00
°E 0 - 8 soft
Level 5
Factory setting
12:00
24h
Time
American English
°E0-8 Soft
Level 5
Standard
Off
Off
The required settings for switching on the appliance for
the first time are listed in the table below.
Change the setting as follows:
1.
Keep pressing button > ` until the required setting
is displayed.
Make the selection with setting buttons + - X.
2.
Press and hold the Info button (8 for 3 seconds.
3.
The selected setting has now been stored.
Infotext
by pressing Info button (
Language selection.
12h or 24h.
Set the current time.
Setting water hardness. When using Multitabs, select the
lowest setting.
Amount of rinse aid affects drying.
Keep pressing button > ` until the required setting
4.
is displayed.
5.
Make the selection with setting buttons + - X.
6.
Press and hold the Info button ( 8 for 3 seconds.
The chosen setting has now been stored.
You have the option of resetting all changed settings
back to the original factory settings.
Note: When you reset your dishwasher to the factory
settings, you are taken directly to the settings for
switching on the appliance for the first time.
Infotext
by pressing Info button
Set the current time.
12h or 24h.
Show end of wash cycle with display "Time" or "In hours".
Language selection.
Setting water hardness. When using Multitabs, select the
lowest setting.
Amount of rinse aid affects drying.
Adjusting water clarity detection for best cleaning results.
Improved drying for glasses and plasticware.
Show the water and energy consumption.
en-us
Getting Started
13
Publicité
