Publicité
Video
• Press the MENU button to select the menu.
• Select the menu point "DVR" with the ↓ or ↑ buttons and press it to activate the release
button . The video camera symbol appears on the top left of the monitor.
• Now press the release button to record a video.
• Press the release button again to end the video recording.
Playback
• Press the MENU button to select the menu.
• Select the menu point "Playback" with the ↓ or ↑ buttons and press it to activate the release
button.
• The photo/video last taken is displayed on the monitor.
• Select the desired photo/video with the ↓ or ↑ button.
The video playback is automatically started. Press the trigger button during the
playback if you want to interrupt the video. Press the trigger button again to keep
the video running.
d) Connection to a PC
• Open the cover on the right next to the monitor.
• Connect the mini USB plug to the appropriate socket and connect the USB A plug to a free
USB interface of your computer.
• The endoscope is now used as a card reading device. This enables you to read stored data
from the micro SD card on the PC.
• First disconnect the connection via the operating system before unplugging the USB cable.
e) Connection to a TV
• First set the video output format (see chapter "Settings").
• Open the cover on the right next to the monitor.
• Connect the jack plug of the video cable to the video output (13) on the endoscope and
connect the cinch plug to the video input of the TV.
• As a result the picture on the monitor turns off and the camera picture is displayed on the
TV. Press the MENU button to display the menu on the TV. The device is operated with the
buttons on the monitor.
• Recorded videos can be played on the TV.
28
Publicité
