Publicité
˜ Operation
˜ Receiving the DCF/MSF radio signal
(Fig . B)
Insert a 1 .5 V AA/LR6 battery with the correct polarity into the battery
compartment
[
7 ]
The product automatically starts to search for the radio signal . This process takes
about 3 to 12 minutes to complete .
Note: Within 4 minutes, the hands will move to 12 o'clock . The reception of the
radio signal is initiated once all the hands have moved to the 12 o'clock position .
After 3 to 10 minutes, the product will receive the signal and set itself to the exact
time .
Starting reception of the radio signal manually: Press and hold the REC button
at least 5 seconds . The product attempts to receive the radio signal . This process
takes a few minutes to complete .
Notes:
Press the REC button
If the product was not able to receive the radio signal because of errors, e .g .
due your location to being at too great a distance from the time signal transmitter
or for other reasons, you can set the time manually . The manually set value is
overwritten as soon as reception of the radio signal is successful .
For products intended for Latvia, Romania, Cyprus, Bulgaria, Finland and Greece
the display stops at "01:00" .
on the back of the product .
with a pointed object (e .g . pencil) .
5 ]
[
[
5 ]
GB/IE
31
Publicité
