Publicité
Remove the back cover
placing first the – contact and then pushing down at the + contact .
Place back the back cover
on the back cover .
Note: Pay attention to the correct seating of the sealing ring . The IP protection is
otherwise not guaranteed .
Turn the back cover
hole
on the top .
[
1 ]
The product is now ready for use .
Radio signal:
DCF signal for HG09355A-DCF, HG09355B-DCF:
The DCF signal (time signal transmitter) consists of time pulses emitted by one of
the most accurate clocks in the world . This clock is located close to Frankfurt/Main,
Germany and it can usually achieve an accuracy within a hundredth of a second
relative to the time standard .
The product receives these radio signals under ideal conditions up to a distance of
approx . 1 .500 km around Frankfurt/Main . Reception of the radio signal generally
takes approx . 3 to 12 minutes .
MSF signal for HG09355A-MSF, HG09355B-MSF:
The MSF signal (time signal transmitter) consists of time pulses emitted by one of
the most accurate clocks in the world . This clock is located in Anthorn, UK and it
can usually achieve an accuracy within a hundredth of a second relative to the time
standard .
28 GB/IE
. Insert the battery into the battery compartment
3 ]
[
with the arrow of the front side matching the one
3 ]
[
in a clockwise direction until it matches the mounting
3 ]
[
,
7 ]
[
Publicité
