Publicité
Our devices are compatible with various load shedding systems. However, you must not
use mains shut-off load shedding, since these systems are incompatible with our devices.
Sudden, inadvertent and repeated power shut-offs can cause premature wear and damage
to the electronics boards, which would not be covered by the manufacturer's warranty.
During load shedding periods, the screen shows "Prioritized load shedding" if an Off/Load
shedding command is sent, and "Priority command" if a Frost-Free command is sent.
The device will then return to its initial operation.
ABSENCE OF MORE THAN 48 HOURS (FROST -FREE)
Irrespective of the mode selected, if you are absent for more than 48 hours, we recommend
that you select the Frost-Free temperature (7 °C). When you return, set the set-point
L
°
temperature again to resume normal operation.
.0
up to 7.0 °C
Lock the access to the controls
Long
press
Long
press
Unlock the access to the controls
Long
press
Long
press
To increase the device's service life and optimise its operation, there is
an automatic bleed built into the upper part of the towel dryer radiator
frame. This operates completely autonomously, with no user operations
required.
LOAD SHEDDING
LOCKING ACCESS TO THE CONTROLS
Leave
Lock
Leave
Lock
Leave
Unlock
Leave
Unlock
AUTOMATIC BLEED
AU TO
20
°
.
0
Maintien en
AU TO
Leave
température
20
°
Lock
.
0
Maintien en
Leave
AU TO
température
20
°
Lock
.
0
Maintien en
AU TO
Leave
température
20
°
.
Unlock
0
Maintien en
Leave
température
Unlock
57
Publicité
