Publicité
The Boost function is used to increase the bathroom temperature more quickly.
t allows you to heat the room, heat and dry the towels more quickly. In the case of models
with a blower, you can choose to activate frame heating alone or with the blower.
- Start in the same time the fan and the frame to get warm quickly and increase the room
temperature by 3°C in less than 15 minutes (may vary depending on the insulation, the
volume of the room and the position towel dryer).
To
start
the
Boost,
ding
on
the
last
5 minutes to 1 hour with
X 1 ou 2
- Start only the frame and and dry/heat my towels faster.
To start the Boost, press the
minutes to 1 hour with
The duration is 15 minutes by default.
X 1 ou 2
- Start the Boost which starts the frame to heat the room and dry/heat my towels more
quickly.
To start the Boost, press the
utes to 1 hour with
The duration is 15 minutes by default.
X 1
USE THE BOOST
I have the model with a fan, I can :
press
the
Boost
used). You
or
. The duration is 15 minutes by default.
button twice. You can adjust the Boost duration from 5
or
. Press again to stop drying.
I have a model without fan, I can :
button . You can adjust the Boost duration from 5 min-
or
. Press again to stop drying.
51
button
(1
or
can
set
the
Boost
To stop before the timer
ends, press
To stop before the timer
ends, press
To stop before the timer
ends, press
2
times
depen-
duration
from
.
.
.
Publicité
