Publicité
-
When the device is heated for the first time, a slight odour may be
noted. This is caused by the evacuation of any traces linked to the
manufacture of the device.
-
You can access the operating instructions for this device by visiting the
manufacturer's website indicated on the warranty card in this manual.
-
Our devices are incompatible with energy management systems or
load shedding systems with a shut-off function. They will damage the
thermostat.
-
For safety reasons, it is formally prohibited to refill the devices.
If necessary, contact a qualified professional.
-
To ensure correct operation of the fan (depending on the model),
it is recommended not to obstruct or cover the air outlet (for example
with a towel). Otherwise, the fan's safety mode could be triggered.
-
Do not place a dressing gown on the control panel.
-
Before performing maintenance on the bathroom radiator, switch it
off and allow it to cool. Never use abrasive products or solvents.
-
Do not install the device directly under a power outlet.
-
As the surface of the device can be very hot, pay particular attention
if placing delicate clothing on top (e.g.: Ensure that any laundry is
colour-fast before placing it on the towel dryer).
-
Once installation is complete, remove the protective plastic film from
the control panel to prevent the risk of ingestion and suffocation.
-
To avoid danger due to accidental resetting of the thermal circuit
breaker, this device must not be powered via an external switch such
as a timer, or be connected to a circuit that is regularly powered on
and off by the electricity supplier.
-
A device presumed to be the cause of a disaster must remain on
site at the disposal of insurance experts, and the victim must inform
their insurer. Any replacement must be done in agreement with the
insurance.
35
Publicité
