Publicité
Installation and Servicing
PREPARING TO INSTALL THE DEVICE
Installation rules
-
This device has been designed for installation in a residential setting.
For any other scenario, please consult your dealer.
-
Installation must be carried out in accordance with good industry
practice, and with the standards in force in the country of installation
and electrical installations must comply with the requirements and
guidance of the IET wiring regulations BS7571.
-
In wet environments such as bathrooms and kitchens, the connection
box must be installed at least 25 cm from the floor and outside of
Area 2. The installation must be equipped with a 30 mA protective
residual current device.
Keep the device out of the way of any air currents that might
disrupt its operation (e.g.: under a ventilation system, etc.).
Do not install it directly under a power outlet.
> 250 mm
Maintain the minimum distances from
furniture when positioning the device.
Do not install any shelves above the
> 150 mm
device.
The power box at the bottom of
your device must be at least 5 mm
away from your wall to ensure good
ventilation.
To avoid all danger to very young
children, it is recommended that
this device be installed such that the
lowest heated bar is at least 600 mm
> 250 mm
above the ground.
> 200 mm
37 37
Publicité
