Publicité
Two detachable hooks are supplied.
1. Insert and hold the bolt (A) to back side of the the plastic (B) with
one hand ;
2. Assemble and hold the plastic (C) to back side of the peg (D) with
the other hand ;
3. Assemble all the parts to tubes by turning the peg in given direction
(by pushing the bolt from back side continuesly).
Note: Maximum turning after contact of plastics and tubes: 2 turns.
B
A
Before any maintenance action, cut the power supply to the device.
To maintain the device's performance, it needs to be dusted
approximately once a month.
Never use abrasive products or solvents.
INSTALLING THE HOOKS
C
B
A
MAINTENANCE
D
C
40 40
D
Publicité
