Publicité
Description
1.
Heatpanel
2.
Electricity connecting terminal
3.
Wall/ceiling support (x2)
4.
Hanging bracket (x2)
The device is made up of the following elements:
-
The actual Heat panel with electrical cable and plug
-
Remote control
-
Two hanging brackets with attachment materials
-
Two wall/ceiling supports
Installation and mounting
Electricity supply
The device must be connected to an earthed socket.
Check that the socket you wish to use provides the voltage that is stated on the type plate
of the device.
The electricity supply to which the device is connected must be protected by an earth
leakage circuit breaker (max. 30 mA).
Permanent installation
The device is designed to be installed at a permanent location and connected directly to
the electricity network. The installation must be equipped with an (RC: extra) on/off
switch. For safety reasons, this installation must be carried out by a professional
electrician.
5.
Back of heat panel
6.
Electrical cable with plug
7.
Remote control
31
Publicité
