Publicité
Steel housing
Production description
Your device is an elegant answer to all your heating needs, both indoor and out. The
device can be secured to a wall as well as a ceiling or roof covering. It fulfils the CE
standards and the IPX4 requirements and that means that it can also be mounted in a
humid environment. The device is not designed to be exposed to heavy downpours or
hang outdoors for the entire season without any protection. The device is best placed
under a porch, car-port or other covering, i.e. in semi-open spaces/conservatories,
workplaces and similar.
Use the device exclusively for the purposes for which it was designed, i.e. heating a
household or semi-commercial space or terrace. Do not hang textiles or similar over the
device to dry them and bear in mind the minimum distances to the device!
Technical data
Power
Voltage
IP class
Front
Backside
Dimensions
Weight
The casing, particularly the front of the device, will
get extremely hot, up to 360°C! For safety
reasons, the lowest point of the Outdoor heat
panel must always remain at least 180 cm above
the ground, whether secured to the wall or ceiling.
1500 Watt
220/240V~50Hz
IPX4
aluminium
steel
5 x 105,5 x 17 cm
8,4 kg
27
Publicité
